Feature of Mounts It isolators the Vibration and Shock Of the machine from the floor . It can also reduce the influences from other machine . Better parts finshes and high quality from vibration reduction . It eliminates the noise from the floor or due to the resonance of building . Machine are stationary on the floor without anchors . It keeps the machine in its position , Therefore the installation cost and time Can be greatly saved . The layout Can be easily changed to improve the productivity . Machines can set up on the Second floor . The machine tools level can be large range adjusted . easily and fast. Elastomers is make of nitvile rubber compound , It can resist oil and refrigerant . Application Metalcutting machines , Metalforming machines , Rubber and plastic machines . Printing machines , Wire machines , Packing machines , Foodprocess machines , Generator and heavy-duty machines . How TO install Place the mounts under the anchor hole of the machine . insert the bolt into the screw hole Of mount . And screw it in Until it reaches the bearing plate . Then adjust the level of machine . Finally tighten the nuts .
S78 Machine Anti-Vibration Mounts
Part NO.
Rubber hardness index
Dimensions
Bolt(mm )
Adjust heigh ( mm )
Static load per mount
Static load per mount
φ-H-Sh
shore (A )士3
φ
H
M
h
Fmax(kg)
Sz(mm)
f.z(HZ)
S78 040-15-50
50
40
15
M5×30
5
150
1.4
13
S78 080-25-50
50
80
25
M10×80
8
500
2.8
9.4
S78 080-25-60
60
600
S78 080-25-70
70
700
S78 120-32-50
50
120
32
M12×100
12
1000
3.2
8.8
S78 120-32-60
60
1200
S78 120-32-70
70
1400
S78 120-32-80
80
1600
S78 160-35-50
50
160
35
M16×120 (M20)
12
2000
3.3
8.7
S78 160-35-60
60
2200
S78 160-35-70
70
2400
S78 160-35-80
80
3500
S78 185-39-60
60
185
39
M20×160 (M16)
12
3200
3.6
8.3
S78 185-39-70
70
3500
S78 185-39-80
80
4200
S78 210-50-60
60
210
50
M2×160 (M24)
12
3500
4
8.9
S78 210-50-70
70
3800
S78 210-50-80
80
4600
S78 228-54-60
60
228
54
M24×1.5×180(M20)
12
3500
1.5
7.5
S78 228-54-70
70
4300
S78 228-54-80
80
6500
S78 315-70-70
70
315
70
M30×2×200(M24)
12
7500
6
6.4
S78 315-70-80
80
9500
Easy Installation-No drilling or bolting to floor required :
1 Put the machine to be sling , place the mounts Under the machine.
2 Insert the b0lt into the screw hole of mount . and then lay down the machine going ahead to mounts.
3 Clockwise rotate the bolt . and then adjust the level altitude of machine.
4 When the machine is be adjust stable , finally tighten the nuts.
